Cold Storage

We manufacture of Cold Storage that are made by advanced technology used for preserving food grade items like Dairy Products, fast foods, Frozen food, sea foods, Fruits & Vegetables, dry fruits, mineral water etc consuming less energy.

Accessories

Sliding Door

Opening size
Width : 1000/ 1200/ 1500/ 1800mm
Height: 2100 to 3000mm
Thickness: 80mm
Panel surface material : Both side GIPP or SS as per requirement

Hatch Door

Opening size (WxH): 20”X20”, 24”x24”, 30”X30”
Different size hatch door with heavy frame for easy material movement in high turnover ice cream and dairy industries.

Pressure Ventilator

Tru-action pressure ventilater with/without heater to balance pressure and vacuum inside cold room.

View Port

12" X 12" View port with three layer argon filled toughen glass which can be visible upto 20"C inside the cold room.

Strip Curtain

Semi transparent PVC strip curtain for negative temperature application to prevent heat loss and ultimately the power.

Technical specification

THICKNESS : 60,80, 100,125 & 150 mm

SURFACE MATERIAL Gl Pre-Painted Sheet, S.S. Sheet (Grade 304/316 & Surface Finish 2B & Mate), GI Plain Sheet, Plain Galvanize Iron. (Inside & Outside different metal can be placed as per your requirement).

FLOOR :

For Kota stone or Concrete floor, Puf Slab with both side tar felt coated.
For Kota stone or Concrete floor, both side metal surface panel in which each side fits with cam
lock and prevent temperature loss.
Aluminium Chequered Plate with Marine Ply.
FRP Cladding on floor

DOOR :

Flush Type : Swing Door with FRP Profile, Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life.
Opening Size : 24"x72",30"x72",34"x78",46"x84" (Door Opening W x H)
Over Lap Type: Teak wood frame with metal covering by using heavy duty hardware for better strength
Size : 45"x84",49"x84",54"x84", 60"X90" (Door Opening W x H)

ROOM SIZE :

Length & Width Minimum 1.78 mt and Bigger size 0.146 mt in multiples. As per requirement
Standard Height for 60 mm thickness 2.47 mt, 80 mm-2.51 mt,100 mm-2.55 mt, 125 mm-2.60 mt, 150 mm-2.65 mt. Single Panel Height upto 12 mt and above as per your requirement.

Technical specification of puf panel

Parameters	Description
Average PUF Density	40 ± 2 Kg/ cu.mtr/ m³
PUF Blowing Agent	141B (CFC free)
Insulation Material	Polyurethane foam
Temperature range	+90°C to -60°C
Penal Type	Discontinuous type with cam lock
M.O.C. Of Cam Locks	Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement. Cam-lock panel joints easy assembly and leakage resistant, panel-to-panel joints.
Type Of Panel Joints	Tongue & Groove Joint with Cam lock and all side rubber gaskets
Corner Panel Available	12” X 12” X 162”(Maximum Length)
Length of wall & ceiling panel	2032 mm to 12000 mm 80” to 472.5” inch
Ceiling Suspension items with specs	MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load distribution Anchor bolt (MS) hanging bolt with 40 mm washer 2.0 mm thickness Sealing to panel MS road Clamp with an insulated crown.
Closed cell content	90 to 95%
Vapour Permeability	5.5mg/PASM
Water Absorption	Less than 2%
Fire Resistance	FR Grade (Fire Resistance Grade)
Compressive Strength at 10% Deformation	0.21 N/ sq.mm (For PUF only)
Tensile Strength	0.58 N/ sq.mm (For PUF only)
Adhesive Strength(Foam to Sheet)	2.9kg/sq.mtr
Adhesive Strength (Foam to Sheet)	2.9 kg /sq.mtr
Panel Facing Availability	With Rib or plain on Demand (Ribs are provided for more strength)
Wall & Celling Panel Facing material	Pre Painted Galvanised sheet, Thickness 0.50mm Plain Galvanised sheet, Thickness 0.50mm S.S. sheet, Grade 316, 0.50mm finish 2B/ 0.6mm mate No.4 S.S sheet, Grade 304, 0.50mm finish 2B/ 0.6mm mate No.4
Floor Panel Facing Material	• PUF Panel with both side tarfelt sheet. • PUF Panel with both side 0.5mm GIPP sheet. • PUF Panel with outside GIPP sheet, inside 9 mm thick marine ply with 2 mm thick Aluminium Chequered Plate
Specification for Colour Coating	A. RAL No. : 9002/9003 or it's nearest B. Indian Standard code Colour Coating : IS 14246 Galvanizing : IS 277 Base Metal : IS 513 C. Organic Coating : Type RMP (Polyester) D. Zinc Coating : 120 GSM E. Top Primer (Thickness in micron 'μ') : 5 +/- 1 μ F. Top Coat (Thickness in micron 'μ') : 20 +/- 1 μ G. Back Primer (Thickness in micron 'μ') : 4 +/- 1 μ H. Back Coat (Thickness in micron 'μ') : 4 +/- 1 μ I. Guard Film (Thickness in micron 'μ') : 40 +/- 3 μ J. Salt Spray Test /Humidity Test : 750 hrs. /1000 hrs.

Go to the Desktop Website